Why the burger box matters more than it looks
A burger is at its best for a few minutes after it is assembled. After that, steam from the patty works its way into the bun, sauce finds the seams, and grease looks for somewhere to go. On the counter this hardly matters. On a delivery run, it decides whether the customer gets a burger or a soggy, flattened sandwich.
That is why picking a burger box manufacturer in India is a specification decision, not just a print job. This guide is written for QSR chains, cloud kitchens, cafes and food trucks. It covers formats, board choice, grease resistance, venting, branding and order planning, with a section for operators in Gurugram and Panchkula, two markets with very different demands on packaging.
The four jobs of a burger box
Before talking about board or print, it helps to be clear about what the box must do:
- Keep the bun from going soggy. This is mostly about letting steam out.
- Hold grease and sauce. The inside face has to resist oil so it does not soak through and mark the outside.
- Survive the bag. Delivery bags are packed tight, often with drinks and sides on top. The box needs to keep its shape and stay closed.
- Carry the brand. For a delivery order, the box is often the first physical contact a customer has with your restaurant.
Burger box formats
Our burger boxes are vented clamshells, made in single, double, slider and gourmet formats:
| Format | Size | Typical use | |---|---|---| | Single | 12 x 12 x 8 cm | Standard single-patty burgers | | Double | 13 x 13 x 10 cm | Double-patty, taller or loaded burgers | | Slider | Size on request | Mini burgers, kids' meals, tasting boxes | | Gourmet | Size on request | Premium burgers with height and toppings |
A good rule is to fit the box to your tallest regular burger, not your average one. A box that squeezes the top of the bun crushes the build and pushes sauce out of the sides. Equally, too much empty space lets the burger slide and fall apart in transit.
Most menus need two sizes, perhaps three. Every extra size is another stock item to store, count and reorder, so it is worth testing whether your regular and premium burgers can share a box before adding one.
E-flute corrugated or food-grade board
We make burger boxes in two constructions: E-flute corrugated, or 350 GSM food-grade board. Both have a grease-resistant inner.
E-flute corrugated has a fluted layer between two liners. That gives it better insulation and more stacking strength, which is why we recommend it for delivery. The burger stays warmer for longer and the box is less likely to crush when other items are packed on top.
350 GSM food-grade board is a flat, single-layer board. It prints sharper and costs less, which makes it a sensible choice for counter service, dine-in and takeaway that is eaten within minutes.
Many QSR operators use both: board for in-store orders and E-flute for delivery and aggregator orders. If you do this, keep the artwork the same across both so the brand looks consistent wherever the burger is eaten.
Grease resistance and steam vents
These two features decide whether the burger arrives in good shape.
- Grease-resistant inner face. A grease-resistant coating on the inside stops oil from soaking into the board. Without it, a juicy patty or a sauce-heavy burger can leave dark marks on the outside of the box within minutes, which looks poor on arrival.
- Steam vents. Vents are part of our standard burger box die. Steam needs a way out. If it is trapped, it condenses on the lid and drips back onto the bun, which softens within minutes.
- A closure that holds. The lock on a clamshell needs to stay shut when the box is tilted, stacked or squeezed into a bag. Test this with your packers before you approve a sample.
If customers complain that burgers arrive soggy, look at the venting and the inner coating before changing the recipe or the bun supplier.
Branding your burger box
Printing options include flexo print and 4-colour offset, with matte lamination available. A few practical points:
- Lid first. The lid gets the most attention. A strong logo, your brand colour and an ordering link or QR code are usually enough.
- Sides matter in the bag. When boxes are stacked on the pass or in a rider's bag, the sides are what people see. Put your name there too.
- Use the inside lid. A short line inside the lid is seen the moment the box opens. It is a cheap way to make the experience feel considered.
- One design family. Matching burger boxes with your meal trays and side boxes makes a combo order look like it came from one brand. Our meal trays and multi-purpose food boxes can be printed in the same artwork style.
Flexo suits bold, simple designs with a few solid colours. Offset is the better choice for photographic images, gradients or fine detail. If your artwork is a logo and one or two brand colours, flexo is often enough.
For QSRs in Gurugram and Panchkula
Gurugram and Panchkula are both busy burger markets, but they ask different things of a box.
Gurugram has a dense mix of office complexes, food courts, malls and residential societies, and a large share of burger orders go out through delivery apps. Lunchtime office orders and late-evening delivery both mean boxes spend time in bags and in traffic. For these operators:
- E-flute with a grease-resistant inner is the sensible default for delivery.
- Boxes often sit at a pickup counter before a rider arrives, so venting matters even before the trip begins.
- Brands competing for attention on crowded delivery platforms tend to lean on strong printed lids, because the unboxing is part of the impression.
- Orders for Gurugram are despatched from our factory on Sitarpur Road, Derabassi, on the Chandigarh-Ambala Highway, so allow transit time on top of production lead time when you plan reorders.
Panchkula is part of the Chandigarh Tricity and close to our Derabassi factory. Burger demand there comes from cafes, family restaurants and cloud kitchens serving residential sectors, with busier weekends and evenings. For these operators:
- Many cafes serve a mix of dine-in and takeaway, so board boxes for the counter and E-flute for delivery can work well.
- North Indian winters are cold, and a burger cools quickly on the way to the door. The better insulation of E-flute is worth considering for delivery in the colder months.
- Being close to the factory makes it easier to see physical samples and discuss artwork before approving a run.
MOQ, lead time and planning
For our printed burger boxes:
- MOQ: 10,000 pcs per size and design
- Lead time: 12 working days
Plain stock in standard sizes can be supplied in smaller quantities, which can help a new outlet before its branded run is ready.
Lead time is production time. Before it, allow time for the brief, artwork, proof approval and a physical sample. To set a reorder point, work out how many boxes of each size you use in a normal week, cover the lead time plus transit, and add a buffer for your busiest periods. Running out of branded boxes means falling back on plain ones exactly when you are busiest.
What drives the cost of a burger box
We do not publish prices, because the cost depends on your specification. The main drivers are:
- Construction: E-flute corrugated or 350 GSM board.
- Size and format: larger and taller boxes use more material.
- Print method and coverage: flexo or 4-colour offset, and how much of the box is printed.
- Finishes: matte lamination and the grease-resistant coating.
- Quantity: setup costs are spread across a longer run.
Asking for two specifications on the same quote, for example E-flute and board for your single burger, is the quickest way to see the trade-off.
Send us your burger box brief
All Tech Printpack has made printed packaging since 1991. Our 25,000 sq ft factory in Derabassi has in-house offset printing, die-cutting and finishing, and we use food-grade certified paper and inks. We supply food brands across the Chandigarh Tricity, Punjab, Haryana, Himachal Pradesh, Uttarakhand, Jammu & Kashmir and Delhi NCR, with pan-India despatch for bulk orders.
Tell us your burger sizes, monthly volume, delivery and dine-in split, and your artwork. Send your brief or request a sample through the contact page, or call or WhatsApp +91 82830 50005, and we will help you choose a box that gets your burger to the customer the way it left the kitchen.